Several key points that must be noted during the installation of diesel generator sets:
1. Need to have suitable air inlet and outlet areas.
2. The surroundings should be clean and there should be no corrosive gases or vapors that produce acidic or alkaline substances in the vicinity. Conditional equipment for firefighting.
3. It is necessary to connect the smoke exhaust pipe indoors to the outside, and the pipe diameter must be greater than or equal to the exhaust pipe diameter of the muffler. There should not be three bends in the connected pipe to ensure smoke circulation. The pipe should be tilted downwards to prevent rainwater from entering. If conditions do not allow the exhaust pipe to be installed vertically upwards, a rain cover must be installed.
4. Before placing the base in contact with the concrete, attention should be paid to the hardening of the ground on site and the casting quality of the machine base to ensure the stable placement of the unit. Special shock-absorbing pads or base bolts should be placed between the unit base and the foundation machine base.
5. The casing of the unit must have a reliable cover for grounding. For generators that require direct grounding of the neutral point, professional personnel must perform neutral grounding and install lightning protection devices. It is strictly prohibited to use the grounding device of the mains for direct grounding of the neutral point.
6. The bidirectional switch between the generator and the mains power must be very reliable and must be inspected and accepted by professional technicians.
For more technical articles, please follow us
/